Category: Rivets

Countersunk Rivet Notes

I’ve learned a few things as I tried to install countersunk rivets on my fuselage, which I’m capturing in this post. In summary, the rivets I originally started using (POP AK41H and AK51H) are not suitable for use on the fuselage, but I found an alternative part that’s readily...

Side Skin Rivets

EDIT 8/5/2020: the AK51H rivets identified below won’t work. See my later post regarding countersunk rivets. In my part 2 post regarding the fuselage side skin install, I noted that the TSi instructs you to use 4.0mm rivets to attach the skin in the dimpled locations, rather than 3.2mm...

Side Skin Install Part 2

I was only able to log about an hour on 14 July. I started to install the long side rail angle (CF-ANG-010-R-C) that runs the length of the side skin, as well as a number of gussets that connect this rail to the uprights. The gussets share a number...

Flush Rivet Process

EDIT 8/5/2020: the AK41H rivets identified below won’t work. See my later post regarding the side skin install. Among other things, this past weekend I came up with a tool to dimple the holes where I intend to install flush rivets. I received my supply of AK41H countersunk rivets...

Research into Flush Rivets and a Nice Workshop Upgrade

EDIT 8/5/2020: the AK41H rivets identified below won’t work. See my later post regarding the side skin install. Last winter my garage was far too cold to work in, especially during January and February, and the garage doors were too leaky to justify heating the space, which is about...